Shop the Sonar Shield Garmin LVS34 travel cover. Covered for the trip. Clear for the water. A travel cover earns its place between outings, then comes off when it is time for your transducer to work.
Travel protection has its own purpose
Sonar Shield travel covers are for transport and storage. Remove the travel cover before sonar operation. That simple change gives you coverage between trips without leaving the travel shell over the transducer while fishing. Follow the instructions for your exact cover and equipment; a similar-looking accessory is not proof of model compatibility.
What Garmin says about an unobstructed sonar view
In the LiveScope Plus LVS34 installation instructions, Garmin recommends positioning the shaft-mounted transducer as far from the trolling motor as possible to avoid obstructions in the sonar image. That is mounting guidance about the motor, not a test of aftermarket covers. It supports an important setup principle: give the transducer its intended clear sonar view.
Our travel-cover approach keeps the roles straightforward. Protect the equipment during travel and storage, then remove the shell before putting the sonar to work. A cover does not need to stay on in the water to be a useful part of your fishing setup.
A separate instruction for LiveScope 2 owners
Garmin gives a more specific instruction in its LiveScope 2 guide, Keeping the Water Sensor Clear: “You must not install any type of protective cover or transducer case on the device that covers the water sensor.” The guide explains that this sensor detects immersion and needs to remain clean and accessible.
This instruction is for LiveScope 2. It must not be presented as an LVS34 water-sensor instruction or a blanket ban on every protective accessory. Check the manual for the exact transducer you own. We have not tested competing in-use covers, and this article does not claim that every such design interferes with sonar.
Make the transition easy
- Before sonar use, remove the travel cover and put it in a familiar storage spot.
- Use your model’s installation guidance to keep its intended sonar view and any specified sensors clear.
- After the outing, fit the correct cover as directed for travel and storage.
The current LVS34 product listing describes a quick-release lever and model-specific ASA shell. Choose the exact equipment model first, then your preferred available color. Our graphic uses Sonar Shield’s own installed-cover photograph with an advertising overlay; it shows the covered travel arrangement, not sonar operation under a cover.
Protection between trips. A clear view when you fish. That is the practical reason for a removable travel cover.
Created with AI assistance using Sonar Shield's topic direction and research from the sources cited in this article.